Search

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held band saws.

Note: The scope for this NOI (originally published on February 23, 2021) was updated by the responsible SDO on May 14, 2024. 1.1. This standard provides requirements to properly assess the thermal and mechanical performance...

1.1.2 These requirements cover: a) fuseholders intended for use with Type C (Edison-base) and Type S Plug Fuses as described in NMX-J-009/248/11-2000-ANCE, CSA C22.2 No. 248.11, UL 248-11, Low-Voltage Fuses - Part 11: Plug...

Clause 1 of the general standard3 applies, except as follows: 201.1.1 Scope Replacement: This part of IEC 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT (RASE) and...

Clause 1 of the general standard1 applies, except as follows: 201.1.1 Scope Replacement: This part of IEC 80601 applies to the general requirements for BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL ROBOTS that physically...

This clause of Part 1 is applicable, except as follows. Addition: This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass. This document does not apply to hedge...

This part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1...

1 Scope 1.1 These minimum requirements cover accessories intended for direct connection to the low or delivery pressure side of compressed gas regulators. These devices are not intended for direct connection to high storage...

Note: This NOI (originally published on August 3, 2022) was reissued by the responsible SDO on July 23, 2024. Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial stages of...

Note: The title and scope of this Notice of Intent (originally published on May 30, 2023) was updated by the responsible SDO on July 23, 2024. 1.1 Inclusions This Standard specifies the requirements and minimum standards for...

The proposed Standard will specify requirements and performance specifications for determining and evaluating competencies for emergency personnel (such as police, firefighters, and paramedics) engaged in responding to...

1.1 These requirements cover stationary centrifugal fire pumps intended for use in water-supply systems for fire-protection service. 1.2 The pumps covered by these requirements are intended for installation and use in...