Search

These requirements apply to Factory-Built Type 'A' Chimneys, which do not require field fabrication. They are for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance...

These Requirements apply to Factory-Built Chimney assemblies which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue...

1.1 (REV1) This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage...

1.1 There requirements cover liquefied petroleum gas (LP-Gas) vaorizers of the stationary type. 1.2 Vaporizers covered by these requirements are intended to be installed and used in accordance with the applicable Codes and...

These requirements cover emergency breakaway fittings intended only for flammable and combustible liquid service including gasoline with up to 15% ethanol. An emergency breakaway fitting is intended for use with dispensing...

1 SCOPE 1.1 These requirements cover emergency breakaway fittings intended only for flammable and combustible liquid service including gasoline with up to 15 % ethanol. 1.2 An emergency breakaway fitting is intended for use...

Note: The scope of this Notice of Intent (originally published on August 11, 2020) was updated by the responsible SDO on August 20, 2024. Note: The scope for this NOI (originally published on August 11, 2020) was updated by...

1.1 These requirements apply to factory-built gas-fired package boilers having input ratings of more than 117,228 W (400,000 Btu/h), per individual combustion chamber, and intended primarily for commercial and industrial...

1.1 These requirements apply to factory-built gas-fired package boilers having input ratings of more than 117,228 W (400,000 Btu/h), per individual combustion chamber, and intended primarily for commercial and industrial...

1 Scope 1.1 These requirements cover metallic and nonmetallic safety cans that have a maximum capacity of 5.3 US gallons (20 L) and that are intended to store and handle flammable and combustible liquids in commercial and...