Search

1.1 This Standard applies to the following products intended for use in accordance with the Rules of the Canadian Electrical Code, Part I: (a) metal and nonmetallic cutout boxes; (b) metal and nonmetallic junction boxes (of...

1.1 This standard describes a physical method of quantitative analysis. The method may be used to analyze mixtures of fibers that differ in density by at least 0.15 g/ml. The method may also be used when chemical methods of...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held circular saws , which hereinafter will be referred to as saws. This standard does not apply to saws designed for...

1.1 This method assesses the fastness of the colour of textile fabrics and yarns to dry cleaning solvent. The results of this test have been found to correlate satisfactorily with those obtained in commercial dry cleaning...

1.1 This method describes a procedure for determining the shrinkage that may occur in a fabric as a result of dry cleaning. 1.2 The procedures for determining the dimensional changes as a result of wet cleaning are covered in...

1.1 This method determines the breaking strength of sewn seams in woven textile fabrics. 1.2 The seams may be obtained either from a previously sewn article or may be prepared in the laboratory according to agreed...

1.1 This method determines the resistance of textile materials containing cellulosic fibres to deterioration by the action of a cellulolytic fungus. The method is of particular importance in testing fabrics designed for...

1.1 This method describes a procedure for the removal, prior to testing for flame resistance, of non-permanent flame-retardant treatment applied to textile floor-covering materials. 1.2 This test method may require the use of...

1.1 This method describes a procedure developed for colour matching of textiles. 1.2 Three different types of light sources are provided. These are intended to simulate north-sky daylight, incandescent lighting and commercial...

1.1 This method describes a procedure for evaluating the resistance of fabrics to pilling using the rotating box method. A pill is a bunch or ball of entangled fibres attached to the surface of a fabric by one or more fibres...

1.1 This standard provides terminology, defines Canadian viticulture areas (geographical indications), prescribes certain oenological practices, and specifies technical and labeling requirements for wine. 1.2 This standards...

1.1 This Standard specifies procedures and requirements for Pure Tone Air Conduction Threshold Audiometry, without masking, used in hearing conservation programs. It is especially applicable to individuals whose hearing...