Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références
Le présent document fournit une liste de livrables,, qui comprennent des dispositions relatives aux informations à inclure dans le manuel d'utilisation.
Le présent document s'applique aux engins de terrassement tels que définis dans l'ISO 6165.
Cette liste de livrables est fournie à titre de guide pour la création de manuels de l’opérateur.
NOTE Les livrables se réfèrent à…
Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks,...
ISO 3691-1:2011 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks, as defined in ISO 5053: industrial counterbalanced trucks; reach trucks with retractable mast or retractable fork arm carriage; straddle trucks; pallet-stacking trucks; high-lift platform trucks; trucks with elevating operator position up to 1 200 mm; side-…
Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial launderi...
This part of ISO 105 specifies a method for determining the consumer relevant shade change of textiles, of all kinds,
(excluding silk and wool) and in all forms, to domestic/commercial laundering procedures in which a bleach activator
(oxygen bleaching system) is used.
The colour fastness resulting from oxygen bleaching in this test provides an indication of the shade change behaviour
observed…
Corrosion of Metals and Alloys - Guidelines for Galvanic Corrosion Control
The primary objectives of this guideline are to present a standard method for avoiding galvanic corrosion in the design stage, to present a standard method for determining whether actual corrosion damage was caused by galvanic corrosion, and to present a guideline for standard methods for suppressing galvanic corrosion that occurs in the presence of an electrolyte when two or more different types…
Energy efficiency of industrial trucks — Test methods — Part 4: Variable-reach rough-terrain trucks
This document specifies the method of fuel consumption measurement for rough terrain- truck variable-reach trucks as defined in ISO 5053-1, herein after referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis.
This part is intended to be used in conjunction with ISO 23308-1. Where the requirements of this part differ from…
Thermal insulation products — Exterior insulation and finish systems (EIFS) — Part 4: Site Verificat...
This document provides the requirements for site verification of an exterior insulation and finish system (EIFS) compliant with ISO 17738-1, installed in compliance with ISO 17738-2, and designed in compliance with ISO 17738-3.
Site verification verifies that the on-site EIFS installation comprises materials and products in accordance with ISO 17738-1, is being installed as per ISO 17738-2,…
Rubber compounding ingredients — Organic chemicals — General test methods
This document specifies sampling and test methods for the determination of the general characteristics of organic chemicals such as accelerators, antidegradants (including wax) and vulcanizing agents (excluding peroxides).
