Search

This National Standard of Canada is equivalent to International Standard ISO 7498-3:1989. This part of ISO 7498: a) defines general mechanisms for the use of names and addresses to identify and locate objects in the OSIE; and b) defines the use of these mechanisms within the layered structure of the Basic Reference Model. This part of ISO 7498 extends the concepts and principles…

This National Standard of Canada is based on International Standard ISO 302:1981. 1.1 The Kappa number test is used for evaluation of pulps with regard to the degree of delignification and bleachability. 1.2 The method can be applied to pulps produced in yields up to about 65% and giving Kappa numbers not higher than 100 on hardwood pulps, and not higher than 120 on softwood pulps (Note 1).…

This National Standard of Canada is equivalent to British Standards Institution standard BS 6806:Part 1:1987. This Part of BS 6806 describes a method for determining the total amount of available formaldehyde in textiles which have been chemically finished. This procedure may be applied to any textile product containing a formaldehyde based precursor.

This National Standard of Canada is equivalent to British Standards Institution standard BS 6806:Part 2:1987. This part of BS 6806 describes a method for determining the amount of "free" formaldehyde in textiles, the presence of which may cause skin irritation. This procedure is applicable to any textile product finished with a formaldehyde-based agent which is readily water…

This National Standard of Canada is equivalent to British Standards Institution standard BS 6806:Part 3:1987. This Part of BS 6806 describes a method for determining the extent to which resin-finished textile materials release formaldehyde into the atmosphere. This procedure may be applied to any textile product containing a formaldehyde based precursor.

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.612-1990. 1 Scope This standard covers the connection between the Integrated Services Digital Network (ISDN) and terminals with interfaces for modems conforming to current standards (e.g. ANSI/EIA 232-D-1986), operating in accordance with demand or semi-permanent circuit mode ISDN…

This National Standard of Canada is equivalent to International Standard ISo 4217:1990. This International Standard provides the structure for a three-letter alphabetic code and an equivalent three-digit numeric code for the representation of currencies and funds. For those currencies having minor units, it also shows the decimal relationship between such units and the currency itself…

This National Standard of Canada is equivalent to International Standard IEC CISPR 11:1990. 1.1 The limits and methods of measurement laid down in this publication apply to industrial, scientific and medical (ISM) equipment as defined in Clause 2, and to spark erosion equipment. 1.2 The assessment of conformity of equipment tested on a test site shall be in accordance with the…

1.1 This Standard is intended to describe the minimum requirements for (a) the application and finishing of gypsum board used in wall and ceiling construction (except gypsum board to receive plaster); and (b) the installation of framing to receive the above gypsum board. 1.2 Where a fire resistance rating is required, the installation, including type and spacings of fasteners, shall be…

1.1 This National Standard of Canada is based on International Standard ISO 772:1988. It defines terms and symbols used in the measurement of liquid flow in open channels. The terms and their definitions are grouped into sections according to the method of measurement or in relation to a particular subject. A list of symbols is given in Appendix A. 1.2 The International Organization for…