1. Scope
1.1 General
This Standard applies to the electrical requirements for park model trailers
that are intended to be connected by a cord and attachment plug to a source of
electrical supply not exceeding 250 V between conductors or 150 V to ground and
50 A maximum in accordance with the Rules of the Canadian Electrical Code, Part
I.
1.2 Nonapplicable Types
This Standard does…
1. Scope
Z241.0
1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series.
Z241.1
1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum…
Measurement of total discharge in open channels — Electromagnetic method using a full-channel-width ...
Specifies procedures for the establishment and operation of a gauging station, equipped with an electromagnetic flow-meter, in an open channel or a closed conduit with a free water surface. The field of application is limited to sites where the magnetic field is generated by an electromagnetic coil which traverses the full channel width. Does not apply to flow-meters which operate by using the…
Mesurage du débit total dans les canaux découverts — Méthode électromagnétique à l'aide d'...
La présente Norme internationale prescrit les procédures de mise en place et de fonctionnement d'une station de jaugeage équipée d'un débitmètre électromagnétique dans un chenal découvert ou dans une conduite fermée à surface libre. Le domaine d'application se limite aux sites dans lesquels le champ magnétique est engendré par une bobine d'induction étendant son action sur…
Commentary to CSA Standard CAN/CSA-S472-92, Foundations
This Commentary applies to the design of foundations for fixed offshore
structures. The term "foundation" is defined as the seabed, any fill, and any
artificial elements (eg, piles or skirts) that penetrate or rest upon these
materials and that in whole or in part support production structures and
facilities. The Standard is divided into subsections that address
(a) site…
1.1 General
This Standard addresses the geotechnical engineering aspects of
(a) gravity-base structures;
(b) fill structures;
(c) fill-retention structures; and
(d) pile-supported structures.
Specific considerations include site investigations, general design principles,
the influences of soil and natural processes on the foundation components, and
the geotechnical factors that…
Measurement of liquid flow in open channels — Measurement in meandering rivers and in streams with u...
Provides guidelines for discharge measurements (especially for site selection) in meandering and braided rivers, and from bridges, following the provisions of ISO 748.
Performance Testing of Solid-Fuel-Burning Stoves, Inserts, and
Low-Burn-Rate Factory-Built Firepla...
1. Scope
1.1
This Standard specifies requirements for the performance testing of
solid-fuel-burning appliances having an air-fuel ratio averaging less than 35:1
as determined by Clause 14. It prescribes a method for determining heat
outputs, appliance efficiencies, emission levels and composition, and flue gas
flow rates for solid-fuel-fired appliances. The Standard also specifies…
Braking Systems - Performance Requirements and Test Procedures - Wheeled
Machines
This National Standard of Canada is based on International Standard ISO
3450:1985.
This International Standard specifies minimum performances and test criteria
for braking systems to enable uniform assessment of the braking capability of
earth-moving machinery which operates on work sites or travels on public roads.
Service, secondary and parking braking systems and retarders are covered…
Circular Concrete Culvert, Storm Drain, Sewer Pipe, and Fittings
1.1
Pertains to nonreinforced circular concrete pipe and fittings intended to be
used for the conveyance of sewage, industrial wastes, storm water, and for the
construction of culverts.
Note: This Standard is applicable to manufacture and purchase only.
1.2
This Standard establishes the following three strength classifications of
nonreinforced concrete pipe and gives their physical…