Search

This National Standard of Canada is equivalent to International Standard ISO/IEC 10175-2:1996 (first edition, 1996-09-01). 1 Scope ISO/IEC 10175 consists of three parts: Part 1: Abstract service definition and procedures Part 2: Protocol specification Part 3: Management abstract service definition and procedures This part of ISO/IEC 10175: - specifies the abstract syntax…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13239:2000 (second edition, 2000-03-01). 1 Scope This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link layer…

1. SCOPE 1.1 This standard applies to an oil-based cementitious primer for use on new or old galvanized metal surfaces under ordinary atmospheric exposure conditions. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with…

1. Scope Caution: ETHYLENE OXIDE IN LIQUID AND VAPOUR FORM IS ACUTELY TOXIC AND HAS BEEN CLASSIFIED AS A HUMAN CARCINOGEN BY THE INTERNATIONAL AGENCY FOR RESEARCH ON CANCER. FOR PROVISION OF ADEQUATE PROTECTION AGAINST THESE EFFECTS, REFER TO FEDERAL AND PROVINCIAL REGULATIONS AND TO CSA STANDARD Z314.9. 1.1 This Standard outlines essential elements in a program for using ethylene…

1. Scope 1.1 This Standard outlines essential elements in a program for using steam to sterilize medical devices in health care facilities, with the object of achieving an adequate level of sterility assurance and minimizing the risk of injury to the operators of steam sterilization equipment. Notes: (1) The term "health care facilities" includes, but is not limited to,…

1. SCOPe 1.1 This Standard specifies requirements for treated wood-based cellulose fibre intended for use as thermal insulation (cellulose fibre insulation, CFI) in new and existing buildings within the temperature range of -60°C to 90°C. 1.2 This Standard describes general requirements for the material and additional requirements specific to applications. The applications are…

This International Standard specifies methods for sampling adhesives and related products, in order to obtain uniform samples of convenient size which are adequately representative of the product being sampled. The sample or samples so obtained are suitable for examination and preparation prior to testing. The methods are applicable to products which require the addition and mixing in of…

1. SCOPE 1.1 This standard applies to two types of diesel fuel, Type A-LS and Type B-LS, suitable for use in high-speed diesel engines that require low-sulphur diesel fuel to meet emission control regulations. These engines generally operate at speeds in excess of 1200 r/min. 1.2 Both types of this fuel may be used in all high-speed diesel-powered equipment.¹ 1.2.1 Type A-LS is intended for…

1. Scope 1.1 This standard applies to one type of diesel fuel that is suitable for use in locomotive-type medium-speed diesel engines.¹ 1.2 This type of fuel may be suitable for use in other medium-speed diesel applications. 1.3 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document…

1. SCOPE 1.1 This standard applies to two types of diesel fuel, Type A and Type B, that are suitable for use in high-speed diesel engines. These engines generally operate at speeds in excess of 1200 r/min. 1.2 Both types of fuel may be used in off-road¹ (also called off-highway) diesel-powered equipment in services involving relatively high loads, for example, industrial equipment…