1. Scope
1.1 This standard specifies requirements for three-strand, hawserlaid,
polyester fibre rope.
1.2 This rope is for general purpose use and may not be suitable for some
specific applications.
1.3 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that could be hazardous.…
1. Scope
1.1 This standard specifies requirements for three-strand, hawserlaid,
polypropylene monofilament rope.
1.2 For the purpose of this standard, "monofilament" rope shall mean rope
made from filaments in excess of 5.5 tex per filament.
1.3 This rope is for general purpose use and may not be suitable for some
specific applications.…
Heavy-Duty Water-Wash-Resistant Grease (NLGI Grades No. 1 and No. 2)
1. Scope
1.1 This standard applies to two grades of heavy-duty, water-wash-resistant
grease with extreme pressure characteristics, good water resistance and
superior corrosion preventive properties.
1.2 This grease is intended for the general lubrication of antifriction
bearings, plain bearings, and sliding and rolling surfaces of equipment…
1. Scope
1.1 This standard applies to one grade of general purpose lubricating
grease with good water resistance and anticorrosion properties.
1.2 This grease is intended for the general lubrication of antifriction and
plain bearings, gears, sliding and rolling surfaces of machinery and
equipment, over the temperature range -30 to +120°C.
1.3 The testing and…
1. Scope
1.1 This standard specifies the requirements for a synthetic liquid
detergent containing a phenolic, quaternary ammonium or other type of
germicide.
1.2 Germicidal liquid detergent produced to this standard is intended
primarily for the general cleaning and disinfecting of floors, walls
and other hard surfaces in institutions where the…
Methods of Sampling and Testing Waxes and Polishes
Standard Test Method for pH of Aqueous Solutions...
1. Scope
1.1 This test method specifies the apparatus and procedures for the
electrometric measurement of pH values of aqueous solutions with the glass
electrode. It does not deal with the manner in which the solutions are
prepared. pH measurements of good precision can be made in aqueous solutions
containing high concentrations of electrolytes or water-soluble organic
compounds, or…
Guide to the Selection and Use of Soaps and Detergents
1. Scope
1.1 This standard is intended for use as a guide in the correct choice of
standard products for cleaning operations in public buildings and
equipment. The standard divided into two parts as follows:
1.1.1 Part 1 contains general recommendations and precautions on the cleaning
of floors, walls and woodwork in public buildings.
1.1.2 Part 2 gives a…
1. Scope
1.1 This standard applies to enamel suitable for use on the exterior and
interior finish on ships boats, and the exterior of deck machinery and
equipment in marine atmospheres and intermittent immersion in sea
water.
1.2 The testing and evaluation of a product against this standard may
require the use of materials and/or equipment that…
Chromate and Lead Free Marine Primer, for Steel and Light Alloy Surfaces
1. Scope
1.1 This standard applies to a primer suitable for interior and exterior
use on steel and light alloy surfaces, aboard ships and for other
marine structures under conditions of marine atmosphere and
intermittent immersion in salt water.
1.2 This primer is suitable for use as a corrosion-inhibiting primer on
properly prepared or pretreated…
1. Scope
1.1 This standard applies to a synthetic laundry detergent in granular or
powder form based on surfactant and suitable builders and designed for
laundering in all types of water.
1.2 This detergent is not recommended for use in mechanical dishwashers.
It is recommended that the textile care labelling system
(CAN/CGSB-86.1) be referred to…
