Search

1. SCOPe 1.1 This standard states the design and performance requirements for protective clothing worn by firefighters, for protection against heat and flame encountered during fires and related lifesaving activities, and specifies methods for testing the materials and material assemblies used in the protective clothing. 1.2 The standard does not apply to specialized protective…

1. PURPOSE AND SCOPE 1.1 This method describes the procedure for making handsheets for the optical test methods. It is designed for application to all screened pulps, unbleached or bleached. 1.2 This method permits the preparation of a smooth and reproducible surface for optical measurements with a minimum of washing and contamination of the sample. 1.3 The testing and evaluation of a…

1. PURPOSE AND SCOPE 1.1 This standard specifies a method for measuring the colour of pulp, paper and paperboard by the diffuse reflectane method. 1.2 This standard is limited to non-fluorescent pulps, papers and paperboards. 1.3 The testing and evaluation of a product against this method may require the use of materials and/or equipment that could be hazardous. This document does not…

1. SCOPe 1.1 These requirements cover reinforced plastic non-pressure tanks that are used for underground storage of flammable and combustible liquids such as gasoline, diesel fuel, oxygenated motor fuels, aviation fuel, fuel oil, and lubricating oil. These tanks may be recognized for use with other products where the tanks have been investigated for such products. 1.2 These…

1. Scope 1.1 This standard applies to latex paint for exterior use on primed wood and on masonry surfaces including concrete, brick, cinder, stucco, concrete block and unglazed tile. 1.2 It may be used on unglazed asbestos-cement shingles and siding¹; however as most asbestos-siding is treated with waterproofing material, at least one year shall…

1. Scope 1.1 This standard applies to three grades of kerosine type aviation turbine fuel consisting entirely of hydrocarbon compounds, except as otherwise specified. Kerosine Type, Aviation Turbine Fuels are distillates having a minimum flash point of 38°C. Grade JET A has a maximum freezing point of -40°C and Grade JET A-1 and Grade F-34 have a maximum freezing point of -47°C. 1.2 Grade…

1. Scope 1.1 This standard sets out the requirements for the transport packaging of dangerous goods classed as explosives (Class 1 in accordance with the schedule to the Transportation of Dangerous Goods Act). 1.2 The UN Packing Methods (Appendix A) apply to domestic road, rail and marine shipment. The IMDG Code applies to international marine transport…

1. Scope 1.1 This standard contains design, manufacturing and use requirements for non-bulk UN specification packagings of no more than 400 kg or 450 l for the transportation of dangerous goods (other than those classed as gases, infectious or radioactive). 1.1.1 Part I of this standard applies to classes 1 to 9 excluding classes 2, 6.2 and 7. It…

1. Scope 1.1 This Standard applies to anticorrosive primer suitable for use as a shop primer or a field primer on ferrous surfaces such as steel bridges and structural steel where good durability to atmospheric exposure is required. 1.2 The primer is characterized by easy brushing or spraying on steel, good penetration into voids (rather than…

1. Scope 1.1 This standard applies to weather-resistant enamel suitable for exterior use on metal and wood surfaces, with the exception of floors. 1.2 The enamel is intended for exterior use as a topcoat over structural steel and as a trim finish for wood, and for use on incidental metal. A particular use is for the identification and marking of fire alarm…