Search

L’IEC 62264-3:2016 définit des modèles de gestion des opérations de fabrication permettant l’intégration des systèmes de commande d’entreprise. Les activités définies dans le présent document sont cohérentes avec les définitions des modèles d’objets données dans l’IEC 62264-1. Les activités modélisées agissent entre les fonctions de planification et de logistique d’entreprises, définies comme…

L’IEC 62264-3:2016 définit des modèles de gestion des opérations de fabrication permettant l’intégration des systèmes de commande d’entreprise. Les activités définies dans le présent document sont cohérentes avec les définitions des modèles d’objets données dans l’IEC 62264-1. Les activités modélisées agissent entre les fonctions de planification et de logistique d’entreprises, définies comme…

This part of IEC 60079-35 specifies requirements for the construction, testing and marking of caplights, including caplights with a point of connection for other equipment, for use in mines susceptible to firedamp (Group I – electrical equipment for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of the caplight becoming a source of ignition. The requirements for…

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HIGH INTENSITY THERAPEUTIC ULTRASOUND EQUIPMENT as defined in 201.3.218, hereafter referred to as ME EQUIPMENT. This International Standard adds or replaces clauses listed in the IEC 60601-1 that are specific for HIGH INTENSITY THERAPEUTIC ULTRASOUND EQUIPMENT. If a clause or subclause is specifically intended to…

This International Standard is a design qualification standard applicable to solar trackers for photovoltaic systems, but may be used for trackers in other solar applications. The standard defines test procedures for both key components and for the complete tracker system. In some cases, test procedures describe methods to measure and/or calculate parameters to be reported in the defined…

1 Scope This part of IEC 61481 is applicable to portable phase comparators of capacitive type to be used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or 60 Hz. This standard is applicable to: ?? single-pole phase comparators of capacitive type operating with a memory system up to 36 kV a.c., ?? two-pole phase comparators of capacitive type operating with a…

1 Scope This part of IEC 61481 is applicable to portable phase comparators of resistive type to be used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz and/or 60 Hz. This standard is applicable to phase comparators of resistive type used in contact with the bare conductive parts to be compared: ?? as a complete device including its insulating element or…

1 Scope This part of IEC 61243 is applicable to hand-held two-pole voltage detectors with their accessories (crocodile clips and detachable leads) to be used in contact with parts of electrical systems: – for a.c. voltages not exceeding 1 000 V at nominal frequencies between 16 2 3 Hz and up to 500 Hz, and/or – for d.c. voltages not exceeding 1 500 V. NOTE The a.c. voltages defined in…

This part of IEC 61000 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to…

This part of IEC 62660 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). The objective of this standard is to specify the standard test procedures and conditions for basic characteristics of lithium-ion cells for use in…