Search

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.13-1987. 1.1 This Standard establishes requirements for Mortise Locks and Latches and includes operational tests, security tests, cycle tests, finish tests, and dimensional criteria. 1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results may…

This national Standard of Canada is equivalent to American national Standard ANSI/BHMA A156.14-1991. 1.1 This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, static load, static friction, kinetic friction and finish tests are included. Hardware for light to very heavy doors is covered including both residential and industrial applications. 1.2…

1.1 All exit devices shall be listed or labeled by a nationally recognized independent testing laboratory and be subject to periodic examination service. 1.2 Exit devices are available in Grades 1 and 2, both suitable for all classes of buildings and are based on the performance tests listed. 1.3 The cycling requirements listed are not to be considered as being in addition to the one…

This National Standard of Canada is equivalent to American National Standard ANSI/BHMA A156.18-1987. This Standard establishes finish test methods and code numbers for finishes on various basis meterials. It includes criteria for viewing comparative finishes in the field to determine whether they match and establishes five categories of finishes.

Describes presentation of the data elements and maintenance of the directory. The standard data elements included are intended to facilitate interchange of data in international trade. These standard data elements can be used with any method for data interchange on paper documents as well as with other means of data communication. They can be selected for transmission one by one, or used within a…

Specifies methodologies for the evaluation of the systemic toxicity potential of medical devices which release constituents into the body. Includes, in addition, pyrogenicity testing. The methods cited are from international standards, national standards, directives and regulations.

1. Scope 1.1 This standard applies to self-contained household refrigerators and freezers designed to be installed and used in residential occupancies in accordance with the Canadian Electrical Code, Part 1, CSA Standard C22.1, and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements apply to household refrigerators and freezers intended for connection to 15 or 20 A, 100…

Applies to portable voltage detectors with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 420 kV a.c. and frequencies from 15 Hz to 60 Hz. For the time being, it has been identified that : - For voltage levels up to 52 kV, the actual standard can be used in its entirety ; - For voltage levels above 52 kV, electric testing procedures are questionable…

1.1 These requirements cover the adaptation of tank assemblies contructed in accordance with the Standards described in Clause 1.2 for the collection and storage of used oil. 1.2 The tanks shall be of the non-pressure type and constructed in accordance with the basic requirements of one of the following Standards: A. ULC-S601 - Standard for Shop Fabricated Steel Abovegound Horizontal…

1. Scope 1.1 These requirements cover single and double wall cylindrical vertical steel non-pressure tanks that are used for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Section 3 of these requirements cover single wall tanks. Section 4 of these requirements cover…