Refine Results
Displaying 2641 - 2652 of 10737
Notice of Intent
Textile Test Methods - Resistance to Micro-organisms...
This method determines the resistance of textile materials containing cellulosic fibres to deterioration by the action of a cellulolytic fungus. The method is of particular importance in testing fabrics designed for outdoor...
Notice of Intent
Textile Test Methods - Colourfastness to Dry ...
This method assesses the fastness of the colour of textile fabrics and yarns to dry cleaning solvent. The results of this test have been found to correlate satisfactorily with those obtained in commercial dry cleaning...
Notice of Intent
Safety requirements for electrical equipment ...
This clause of Part 1 is applicable except as follows: 1. Scope Replacement: This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. NOTE If all or part of the equipment falls within the scope of one or more...
Notice of Intent
Heat Absorbing Glass
This standard applies to flat, transparent glass, obtainable as sheet, polished plate or float glass that is substantially opaque to infrared radiation including the short-wave infrared, possessing absorbing properties to...
Notice of Intent
Insulating Glass Units
1.1 This standard applies to sealed insulating glass (IG) units used in windows, doors and curtain walls in building envelopes. It includes requirements for the testing of samples for the integrity and durability of the unit...
Notice of Intent
Glass, Light and Heat Reflecting
1.1 This standard applies to flat, transparent glass, obtainable as polished plate or float glass, one side of which is covered with a thin metallic oxide coating possessing high reflective properties to control transmission...
Notice of Intent
Wired Safety Glass
1.1 This standard applies to flat rolled glass having a layer of meshed wire completely imbedded in the sheet, intended for use in skylights and general glazing in building construction where fire retardation, security and...
Notice of Intent
Plastic Safety Glazing Sheets
1.1 This standard applies to flat rigid plastic sheeting intended to provide a safe type glazing material in building construction. It shall be manufactured to prevent or reduce the likelihood of injury to persons by plastic...
Notice of Intent
Structural Design of Glass for Buildings
1.1 This standard describes the procedures recommended for the structural design of soda-lime glass for use in buildings including windows, glass doors, balustrades, partitions and sloped glazing. 1.2 This standard does not...
Notice of Intent
Performance Standard for Dusk-to-Dawn Luminaires
1. Scope 1.1 This Standard applies to luminaires, traditionally known as dusk-to-dawn luminaires or area security lights, for use in non-hazardous locations that are intended for installation outdoors on branch circuits of...
Notice of Intent
Explosive atmospheres - Part 6: Equipment protection...
Scope This part of IEC 60079 specifies the requirements for the construction and testing of oil immersed electrical equipment, oil-immersed parts of electrical equipment and Ex components in the type of protection oil...
Notice of Intent
Solid biofuels -- Determination of particle size...
1 Scope This document specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top...