Search

This Standard sets forth the minimum requirements for the adaptation of tank assemblies constructed in accordance with the requirements described in Clause 4.1 for the collection, storage and removal of used oil. Used oil...

These requirements cover factory-built grease ducts and grease duct assemblies that are intended to be installed as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel...

1 SCOPE 1.1 This Standard sets forth requirements for flexible underground hose connectors intended for flammable and combustible liquid service at temperatures within the range of -40 °C to +50 °C. 1.2 This Standard also...

1.1 These requirements cover pressure regulators for use with LP-Gas equipment. NOTE: For the purposes of this standard the terms “LP-Gas” and “Propane” are interchangeable. 1.2 Regulators covered by these requirements are...

1.1 This standard applies to 60 - 250°C single- or multiple-conductor jacketed or unjacketed, integral or nonintegral cables and single or multiple coaxial cables for telephone and other communication circuits such as voice...

This Technical Report provides guidance on the use of Ada when producing high integrity systems. In producing such applications it is usually the case that adherence to guidelines or standards has to be demonstrated to...

Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 defines the allocation on a keyboard of a set of graphic characters which, when used in combination with an existing national version keyboard...

1 Scope This part of ISO 12402 specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children. 1DV DT Modification by revising the second sentence of clause 1 to...

Note: This notice of intent was withdrawn by the responsible SDO on March 5, 2024, and is being replaced by ICC's NOI for CAN-ASC-2.5/ICC A118: Acoustics in the Built Environment (https://www.scc.ca/en/standards/notices-of...

This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for household and similar purposes, their...

Note: The scope of this Notice of Intent (originally published on April 4, 2024) was updated by the responsible SDO on August 6, 2024. 1 Scope 1.1 Cleaning and disinfecting of HCFs This Standard applies to the cleaning and...

1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code...