Search

1.1.1.Equipment included in scope This document specifies safety requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring MAINS. HAND-HELD MULTImeters are multi-range...

This part of IEC 60079 specifies the requirements, testing and marking of equipment emitting optical radiation intended for use in explosive atmospheres. It also covers equipment located outside the explosive atmosphere or...

1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled...

1.1 This Standard specifies the safety requirements for medical supply units for application in medical areas, such as general wards, as well as in special purpose areas, such as operating theatres, induction rooms, recovery...

The standard does not currently provide requirements to address extinguishing system units intended to protect volumes less than 100 m 3 . This proposal allows for the design quantity of extinguishing agent to be the same for...

This Standard applies to: oil burners of the atomizing-type irrespective of size, firing rate, or type of fuel oil; vapourizing-type oil burner assemblies with a fuel input of 4.5 L/h or less, intended for use with either...

The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis, primarily used to...

1.1 General This part of 15938-9 collects standard profiles and levels for MPEG-7, specified across all ISO/IEC 15938 parts. While all parts are potential candidates for profiling, current profiles concentrate on the...

This document compliments ISO/IEC 11179-3 by describing registration of classification schemes and using them to classify registered items in an MDR. Any metadata item can be made a Classifiable_Item so it can be classified...

The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO...

This part of International Standard IEC 71 applies to three- phase a.c. systems having a highest voltage for equipment above 1 kV. It specifies the procedures for the selection of the standard withstand voltages for the phase...

This International Standard specifies the preferred method of operation and requirements related to operator controls actuated by hand and foot, installed in agricultural tractors and self-propelled agricultural machinery and...