Search

This Standard specifies requirements for evaluating adhesives used to bond solid wood materials in structural wood products intended for limited moisture exposure applications. This Standard specifies requirements for...

The Standard will address civil/structural components of the marine terminal, including the following: a) Shore-side abutment; b) Access trestle from shore to the loading platform; c) Berthing and mooring dolphins; d)...

The Standard will address siting, design, construction, operation, and maintenance of floating facilities for the production, storage, and handling of liquefied natural gas (LNG) when the facility is permanently tethered to a...

1.1 These requirements cover diesel engines for driving centrifugal fire pumps. 1.2 The engines covered by these requirements are intended for installation and use in accordance with the Standard for the Installation of...

201.1.1 * Scope IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of oxygen CONSERVING EQUIPMENT, hereafter referred to as ME EQUIPMENT, in...

IEC 60601-1:2005+A1:2012, Clause 1 applies, except as follows: 201.1.1 * Scope IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of oxygen...

1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic , non-pressure tanks that are used for the underground storage of flammable and combustible liquids , such as: A Petroleum...

1.1 This standard provides the requirements for relocatable buildings. Note: See Section 4 Glossary, Annex C and Section D3 . 1.2 This Standard applies to relocatable buildings where the major occupancy, as defined in the...

This clause of Part 1 is applicable with the following exception: 1.1 Scope Addition: This Part 2 of IEC 62109 covers the particular safety requirements relevant to d.c. to a.c. inverter products as well as products that have...

1.1 This part of ISO 11137 specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. NOTE Although the scope of this part of ISO 11137 is limited to...

1.1 Organisation and Content — This standard consists of four parts and six appendices. Part I is an introductory part that specifies requirements of general application with respect to the handling, offering for transport...

SCOPE These requirements cover the construction and performance requirements of mechanical and electrical liquid-level gauges for use on vented atmospheric tanks intended primarily for the storage and supply of heating fuel...