Search

1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A...

This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for other...

1.1 This Standard provides minimum requirements for primary containment leak detection that uses qualitative characteristics to detect leaks in the primary containment. NOTE: Depending on the design of the tank system, and...

1 SCOPE 1.1 This Standard covers construction and performance requirements for control units and accessories for intrusion alarm systems, including: A Protected premises control units and accessories for local or signal...

1.1 These requirements cover lining systems for new masonry chimneys . 1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating equipment, where the flue gas temperatures...

2.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from materials used in residential buildings. 2.2 This laboratory guide specifies recommended procedures for the use of...

Purpose and scope This standard specifies requirements for the design, performance, and safety of equipment in an ambulance (patient compartment) used for the transport and care of patients. The standard also specifies...

1.1 This Standard covers requirements for corrosion control additives for fire sprinkler systems, such as corrosion inhibitors. 1.2 These solutions are intended for use in wet pipe sprinkler systems for installation in...

1.1 This Standard covers requirements for vapor corrosion inhibitors and their delivery system for use in fire sprinkler systems. 1.2 These corrosion inhibitors are intended for use in dry pipe and pre-action sprinkler...

This standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a...

This Standard covers flexible sprinkler hose with fittings intended for direct connection to fire sprinklers in installations requiring a flexible attachment to the sprinkler system piping such as clean rooms, suspended...

These requirements cover hose in nominal internal diameter sizes of 8 mm up to and including 32 mm for use on portable and wheeled fire extinguishers, hand hose line fixed extinguishing systems, and also as booster hose on...