Search

1.1 This Standard applies to the cooling performance of portable air conditioners that have a rated cooling capacity of 19 000 W (65 000 Btu/h) or less and provide cooled air in one of the operating configurations described...

This standard provides basic procedures based on joint ultimate load or a limiting slip for the determination of the lateral strength resistance and lateral slip resistance of truss pate teeth embedded in sawn and structural...

1.1 This Standard specifies photometric performance requirements for luminaires that are used for roadway and street lighting applications. 1.2 The following light sources are addressed in this Standard: a) clear HPS lamp; b)...

Note: The scope for this NOI (originally published on November 22, 2022) were updated by the responsible SDO on February 27, 2024. 1 Scope 1.1 General This Standard specifies requirements for the maintenance of electrical...

1.1 The requirements specified in this Standard cover light emitting diode (LED) equipment that is an integral part of a luminaire or other lighting equipment, and which operates in the visible light spectrum between 400 and...

1.1 Purpose This Standard specifies technical requirements on how to make buildings and the exterior built environment accessible and safely usable by persons with physical, sensory, or cognitive disabilities. Commentary: (1)...

Note: The scope of this Notice of Intent (originally published on July 3, 2024) was updated by the responsible SDO on July 23, 2024. 1.1 This Standard applies to a) electrostatic air cleaners intended to remove dust and dirt...

This Standard specifies the requirements for stay in place, modular expanded polystyrene (EPS) Insulating Concrete Form (ICF) units. Once filled with concrete, the ICF units remain in place as the thermal insulation for the...

1.1 General This Standard covers molecularly oriented polyvinylchloride (PVCO) pipe intended for use in pressure applications such as water mains, sewer force mains, and process piping. Note: This Standard does not address...

1.1 This Standard covers the: a) Construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre...

1.1 This Standard specifies construction and testing requirements for single conductor rated 2 kV, single metallic shielded or three conductor metallic shielded power cables rated 5 kV to 35 kV, normally used in wind turbine...