Search

1.1 These requirements cover LED equipment that is an integral part of LED luminaires or lighting systems. These requirements cover LED drivers, controllers, arrays (modules), and packages as defined within this standard...

1.1 These minimum requirements cover the following types of anhydrous ammonia and liquefied petroleum gas (LP-Gas) valves that are used to control the flow of liquid and/or vapor into and out of containers, or in piping...

1.1 General This fenestration Standard/Specification applies to both operating and fixed, new construction and replacement windows, doors, SSPs, TDDs, roof windows, and unit skylights. This fenestration Standard/Specification...

1.1 General This fenestration Standard/Specification applies to both operating and fixed, new construction and replacement windows, doors, SSPs, TDDs, roof windows, and unit skylights installed into exterior building...

1 Scope 1.1 This Standard has been developed for the assessment of volatile organic compound emissions from polyurethane foam materials used in residential and nonresidential occupancies. It outlines a test procedure for the...

A new CSA national Technical Standard is to be developed that will work to adopt/adapt the National Research Council of Canada’s Technical Reports on Vehicular Breath Alcohol Interlock Devices in Canada. This document will be...

This test method is a standard procedure for the determination of paraffins, olefins, naphthenes, aromatics and unknowns (P.O.N.A.U.) in automotive gasolines using gas chromatography and flame ionization detection (GC/FID)...

1 Scope 1.1 These requirements apply to low voltage luminaire systems whose electrical power is derived from photovoltaic modules. Systems include, at a minimum, a photovoltaic (PV) module, storage batteries, one or more co...

This test method is a standard procedure for the determination of paraffins, olefins, naphthenes, aromatics and unknowns (P.O.N.A.U.) in automotive gasolines using gas chromatography and flame ionization detection (GC/FID)...

This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage of flammable...

1.1 These requirements cover products described in 1.3 when used with one or more of the fuels described in 1.4. 1.2 Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to...

This Standard covers dry barrel type hydrants intended for use in piping systems supplying water for fire protection service. Hydrants shall be designed for a minimum working pressure of 1000 kPa. Hydrants of special design...