Search

1 SCOPE 1.1 This Standard sets forth requirements for flexible underground hose connectors intended for flammable and combustible liquid service at temperatures within the range of -40 °C to +50 °C. 1.2 This Standard also...

These requirements cover factory-built grease ducts and grease duct assemblies that are intended to be installed as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel...

This Standard sets forth the minimum requirements for the adaptation of tank assemblies constructed in accordance with the requirements described in Clause 4.1 for the collection, storage and removal of used oil. Used oil...

This Technical Report provides guidance on the use of Ada when producing high integrity systems. In producing such applications it is usually the case that adherence to guidelines or standards has to be demonstrated to...

1.1 Requirements contained in this Standard cover controls of the light-sensitive or presence-sensitive types, or both; for indoor or outdoor service; intended for the control of indoor or outdoor loads up to a maximum of 20...

This clause of Part 1 is replaced by the following. This International Standard specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor or that are...

1.1.1 This Standard applies to service-entrance, feeder, and branch-circuit busways and associated fittings rated at 600 V 1000 V or less, 6 000 A or less, and intended for use in accordance with the Canadian Electrical Code...

This standard is intended to support all workers providing care-in-place and their employers by providing competency requirements and guidance for occupations and roles. Care-in-place refers to all services (e.g...

1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the...

This National Standard of Canada applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark-ignition engines under a wide range of climatic conditions. This...

1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National...

This document specifies requirements for test organisms, suspensions, inoculated carriers, biological indicators and test methods intended for use in assessing the performance of sterilization processes employing dry heat as...