Search

1.1 The purpose of this test method is to determine the contribution to fire growth of protective coverings over foamed plastic insulation when tested in a Full-Scale Room Test in accordance with CAN/ULC-9705, Fire Tests -...

1.1 This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0...

The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources...

These requirements cover exhaust hoods for commercial and institutional kitchens and are intended for placement over restaurant type cooking equipment, such as ranges, broilers, deep fat fryers, grills, etc., during normal...

These requirements cover heat responsive links used for fire-protection service. These links consist of devices intended for installation under load conditions such as for use with automatic fire suppression systems; or...

This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: A Materials which cannot be tested as described in Clause 1.1...

NOTE: Please note that the standard development activity of this NOI was updated as requested by the responsible SDO on October 26, 2020. 1.1 This is a fire test response Standard. This document describes the test method used...

These requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire-protection...

This Standard specifies the requirements for the installation of spray applied low pressure thermal insulating polyurethane foam. The material can be installed as thermal insulation, an air or vapor barrier, or a combination...

Note: The standard development activity for this NOI (originally published on May 2, 2023) was updated by the responsible SDO on July 25, 2023 . 1.1 This Standard establishes a minimum level of protection and safety of...