Search

1.1 This Standard applies to both cord-connected and permanently connected storage-tank water heaters, having tanks less than 610 mm inside diameter, for use on nominal system voltages of 600 V and less, and designed to be...

This National Standard of Canada applies to two types of automotive fuel: type 1, 50% to 85% by volume denatured fuel ethanol with gasoline and type 2, 20% to 25% by volume denatured fuel ethanol with gasoline. Both types are...

PURPOSE This standard specifies the minimum requirements for the construction and surveillance of magazines for the safe and secure storage of industrial explosives. SCOPE This standard is intended to serve as a guide for all...

1.1 This Standard provides a calculation method for determining the heat loss and heat gain of buildings (as described in Clause 1.3 below) for the purpose of selecting the appropriate output capacity of a space heating...

This Standard applies to the following wiring devices of the general purpose nonlocking and locking types, rated 60 A and less, and intended for use in accordance with the Canadian Electrical Code, Part I: (a) general use and...

HSO is developing a National Standard of Canada (NSC) outlining best practices for the co-design and delivery of an integrated, people-centred spinal cord injury (SCI) rehabilitation program. The CAN/HSO S3402:2022—...

This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for electrical equipment...

CAN/CSA-Z241.0-18 - Definitions and general safety requirements for park model trailers Scope This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series. It also gives general...

1.1 This standard applies to newly produced automatic valves (Section 3, Definitions) constructed entirely of new, unused parts and materials. These valves may be individual automatic valves or valves utilized as parts of...

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote...