Search

TITLE: Civil Engineering Works - Aggregates --- Part I: Definitions, Classification and Designation --- Part II: Base, Sub-Base, Surface Layer and Shoulder --- Part III: Bed, Coating, Anticontaminating Layer and Filtering...

The purpose of this Standard is to provide criteria and considerations for the safe selection and use of active fall-protection equipment and systems. The selection and use of fall-protection systems as part of a fall...

This Standard describes the performance standards, technical specifications, physical markings, and qualification tests required for breath alcohol ignition interlock devices. This Standard identifies the functional...

1.1 This Standard applies to hermetic refrigerant motor-compressors (hereinafter referred to as motor-compressors) rated 7200 V or less, for use in air-conditioning and refrigerating equipment that comply with the Standards...

This Standard addresses the safe, effective, and reliable reprocessing of reusable medical devices at each phase of the reprocessing workflow and it provides MDR specific requirements for QMS, personnel, MIFUs, purchase and...

1.1 These requirements apply to technical rescue rope and water rescue throw rope , and associated equipment used by rescue services. 1.2 Part A covers the requirements for technical rescue rope used by emergency services for...

1.1 This Standard applies to woven-jacketed, lined, cotton-synthetic percolating forestry hose which contain non-synthetic fibres of the size commercially known as 38 mm having a minimum service test pressure of 2070 kPa...

1.1 This Standard applies to 25 and 38 mm synthetic percolating type hoses having a minimum service test pressure of 2070 kPa suitable for use in forest fire suppression. These hoses are classified as follows: NOTE: All...

Note: The scope for this NOI (originally published on December 8, 2020) was updated by the responsible SDO on August 22, 2023. 1.1 The requirements of this standard apply to off-board unidirectional and bidirectional...

Scope 1.1 These requirements cover primary, secondary, and coaxial types of aboveground pipes intended for transfer and containment of specific flammable and combustible liquids and fuels or fuel components (and vapors...

1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A...