Search

Note: This notice of intent was withdrawn by the responsible SDO on June 25, 2024. Note: The project need for this NOI (originally published on September 29, 2015) was updated by the responsible SDO on January 6, 2021. This...

This part of IEC 61000 specifies EMC immunity requirements which apply to electrical and electronic equipment intended for use in power stations and substations, as described below. Immunity requirements for electromagnetic...

1.1 This Standard specifies the physical property requirements and test methods to determine the material properties for light density, open cell spray applied semi-rigid polyurethane foam, used as a thermal insulation for...

1.1 These requirements cover exhaust hoods for commercial and institutional kitchens and are intended for placement over restaurant type cooking equipment, such as ranges, broilers, deep fat fryers, grills, etc., during...

This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread...

Note: The title for this NOI was updated by the responsible SDO on August 24 ,2021 (originally published March 17, 2020). These requirements cover electric battery powered airport ground support equipment, such as pushbacks...

1.1 This Standard provides minimum requirements for primary containment leak detection that uses quantitative assessment of physical characteristics to detect leaks in the primary containment. 1.2 These requirements do not...

1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated...

This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread...

The goal of the guideline is to provide methods for modellers that result in an accurate as possible energy model. This goal can best be achieved if the guideline is a ‘living document,’ changing and growing as increasing...

These requirements cover lightning protection components for use in the installation of complete systems of lightning protection on buildings and structures.

1.201 Scope This Collateral Standard applies to the SAFETY of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS incorporating PROGRAMMABLE ELECTRONIC SUBSYSTEMS (PESS), hereinafter referred to as PROGRAMMABLE...