Search

This proposed series of standards aim to specify the minimum requirements for consumer directed finance (Open Banking) Considerations are given to: • Application of strong consumer authentication procedures; • Protection of...

1.1 General This fenestration Standard/Specification applies to both operating and fixed, new construction and replacement windows, doors, SSPs, TDDs, roof windows, and unit skylights installed into exterior building...

Note: The title and scope were updated by the responsible SDO on October 14, 2020. 1.1 This Standard refers to High Performance and Aviation Synthetic Fluorine-Free Foam Liquid Concentrates. Note: The requirements for High...

Note: The scope for this NOI (originally published on December 18, 2018) was updated by the responsible SDO on February 1, 2022. 1 Scope 1.1 These requirements cover battery systems as defined by this standard for use as...

Note: The ICS code, scope and project need for this NOI (originally published June 8, 2021) was updated by the responsible SDO on February 15, 2022. 1 SCOPE 1.1 This Standard covers construction and performance requirements...

1.1 These requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...

1.1 This Standard applies to the construction, operation, maintenance and replacement of electric utility systems that are used to generate, transform, transmit, distribute and deliver electrical power or energy to consumer...

1.1 These requirements cover heat actuated fire detectors in ordinary (nonhazardous) and outdoor locations, for use as components in automatic fire protective systems, to be installed in accordance with the Standard for the...

CAN/ULC-S540 provides the minimum requirements for the design, installation, inspection, testing and maintenance of residential fire warning systems for use within dwelling units and care occupancies not requiring fire alarm...

.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...