ISO 14922-4:1999

This standard specifies requirements so that: ? It is independent of the type of the thermally sprayed structure. ? It defines quality requirements for thermal spraying both in workshops and on site. ? It provides guidance for describing a manufacturer´s capability to produce thermally sprayed constructions to meet specified requirements. ? It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability. This standard is appropriate when demonstration of a manufacturer´s capability to produce thermally sprayed construction, fulfilling specified quality requirements, are specified in one or more of the following: ? a contract between involved parties; ? an application standard; ? a regulatory requirement. The requirements contained within this standard may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of thermal spraying in the following cases: ? Case 1 To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system other than EN ISO 9001 or EN ISO 9002. ? Case 2 To provide specific requirements for thermal spraying in contracts which require the manufacturer developing a quality system. ? Case 3 To provide specific requirements for thermal spraying in application standards which uses thermal spraying as part of its requirements or in a contract between relevant parties.