ANSI/CAN/UL 2272:2024

Scope 1.1 These requirements cover the electrical drive train system including the battery system, other circuitry and electrical components for electric powered scooters and other devices to be referred to as personal e-mobility devices as defined in this Standard. 1.2 This standard is intended for evaluation of the safety of the electrical drive train system and battery and charger combination for energy and electrical shock hazards and does not evaluate the performance or reliability of these devices. In addition, it does not evaluate the physical hazards that may be associated with the use of personal e-mobility devices. 2 Components 2.1 A component of a product covered by this Standard shall: a) Comply with the requirements for that component as specified in this Standard; b) Be used in accordance with its rating(s) established for the intended conditions of use; and c) Be used within its established use limitations or conditions of acceptability. NOTE: See Annex A for a list of Standards covering components generally used in the products covered by this Standard. 2.2 A component of a product covered by this Standard is not required to comply with a specific component requirement that: a) Involves a feature or characteristic not required in the application of the component in the product; b) Is superseded by a requirement in this Standard; or c) Is separately investigated when forming part of another component, provided the component is used within its established ratings and limitations. 2.3 Specific components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions. 2.4 A component that is also intended to perform other functions such as overcurrent protection, groundfault circuit-interruption, surge suppression, any other similar functions, or any combination thereof, shall comply additionally with the requirements of the applicable standard(s) that cover devices that provide those functions.