CAN/UL 2600:2019

Relocatable Buildings
1 Scope 1.1 This standard provides the requirements for relocatable buildings. Note: See Section 4 Glossary, Annex C and Section D3. 1.2 This Standard applies to relocatable buildings where the major occupancy, as defined in the National Building Code of Canada, is: a) Group A, Division 2; b) Group C, except that the standard does not apply to buildings containing dwelling units; c) Group D, or d) Group F, Division 3. Note: See Annex C. 1.3 This Standard applies to relocatable buildings without a basement or heated crawl space where the building area does not exceed the maximums specified in Table 1.1. Note: Buildings that exceed the building heights and building areas specified in 1.2 must comply with the building codes and regulations that apply at the building location. 1.4 Buildings constructed in accordance with this standard are permitted to be of combustible construction or noncombustible construction, used singly or in combination. 1.5 This standard provides requirements that address: a) construction of the building modules including i) structural design ii) ceiling heights iii) accessibility iv) stairs, handrails and guards v) means of egress; vi) fire protection in and between buildings 1.4 Buildings constructed in accordance with this standard are permitted to be of combustible construction or noncombustible construction, used singly or in combination. 1.5 This standard provides requirements that address: a) construction of the building modules including i) structural design ii) ceiling heights iii) accessibility iv) stairs, handrails and guards v) means of egress; vi) fire protection in and between buildings vii) electrical viii) heating and ventilation; ix) plumbing; x) building envelope xi) energy efficiency; and b) site considerations including i) site preparation ii) egress routes iii) spatial separation; iv) fire fighting; and c) instructions and marking. Note: See Annex C.
SDO:
UL
Language:
English
ICS Codes:
91.080.01; 91.120.01
Status:
Standard
Publish date:
2019-11-07
Standard Number:
CAN/UL 2600:2019