ULC-S771.1–10
1.1 This Standard specifies the requirements for [insert
description for type of insulation or system].
NOTE: In 2008, the ULC Thermal Insulation Materials and
Systems Committee adopted the allocation of Standard number
suffixes “.1” indicating a material standard (manufacture), “.2”
indicating an installation (installation contractor) and “.3”
indicating an applications standard (design).This convention for
the use of these three terms shall be applied throughout this
Standard.
NOTE: This guide covers thermal insulation material standard
specifications. If an installation standard is to be developed,
then the material Standard specifications shall use Standard
number suffix “.1” (CAN/ULC-S7XX.1).
NOTE: The ULC Thermal Insulation Committee directed the
Task Groups that the term Thermal Insulation shall be included
in the Scope, but not necessarily in the Title of all S700 series
Standards.
NOTE: Use general terms to prevent needlessly long lists
which may be incomplete.
NOTE: This Scope Section shall not contain any specific
technical requirement.
1.2 The following number of Types, Classes, or Grades of
.....insulation are applicable to this standard.
NOTE: Use Types, Classes or Grades when applicable.
1.3 Insulation applicable to this Standard is intended for use as
[insert text].
1.4 The following limitations apply in the use of [insert
description for type of insulation] insulation described in this
Standard.
NOTE: For example, include any maximum and minimum
temperature limits. In this particular case, state that the product
cannot be installed or used outside a given temperature range
as opposed to a statement that it can be installed or used
within a certain temperature range.
1.5 This document does not purport to address all the health
and safety aspects associated with its use. Anyone using this
Standard has the responsibility to consult the appropriate
authorities and to establish health and safety practices, in
conjunction with any existing applicable regulatory
requirements, prior to its use.
SDO:
ULC
Language:
English
ICS Codes:
01.140.10;
91.120.10
Status:
Standard
Publish date:
2010-03-11
Standard Number:
ULC-S771.1–10