CAN/CSA-ISO/IEC 17878:04 (R2014)

This National Standard of Canada is equivalent to International Standard ISO/IEC 17878:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the Private User Mobility call handling additional network features (ANF-PUMI and ANF-PUMO) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN). ANF-PUMI is a feature that directs incoming calls to a PUM user within the PISN regardless of the PUM user.s geographical location within the PISN, provided that the PUM user.s location is known. ANF-PUMO permits the PISN to process call requests from a PUM user at the home location, if required. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ITU-T Rec. I.130. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 17877. The signalling protocol for ANF-PUMI and ANF-PUMO operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between ANF-PUMI / ANF-PUMO and other supplementary services and ANFs. This International Standard is applicable to PINXs which can interconnect to form a PISN.