CAN/CSA-ISO/IEC 15056:02 (R2010)

This National Standard of Canada is equivalent to International Standard ISO/IEC 15056:1997. This is a searchable PDF. This International Standard specifies the signaling protocol for the support of the Transit Counter additional network feature (ANF-TC) at the Q reference point between Private Integrated Serv ices Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). ANF-TC is a feature that limits the number of Transit PINXs that a call setup request may be routed through e.g., to protect the network against indefinite looping. The Q reference point is defined in ISO/IEC 11579- 1. Service specifications are produced in three stages and according to the method specified in CCITT Recommendation I. 130. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 15055. The signaling protocol for ANF-TC operates in association with the signaling protocols for basic circuit switched call control (as spec ified in ISO/IEC 11572) and call independent (connection oriented) signaling connections (as specified in ISOIIEC 11582). This International Standard also specifies additional signaling protocol requirements for the support of interactions at the Q reference point between ANF-TC and other supplementary services and ANFs. This International Standard is applicable to PINXs that can in terconnect to form a PISN.