CAN/CGSB-86.1-M91

Care Labelling of Textiles
1.1 This standard designates a system of symbols to be used in the labelling of textiles to indicate the preferred care procedures for restoring the textiles to an acceptable usable condition with respect to the properties stated in par. 1.2. 1.2 The symbol system described in this standard relates primarily to the properties of colourfastness, dimensional stability, effect of retained chlorine and maximum safe ironing temperature. The use of this system signifies that as a result of the restorative treatment, there shall be no appreciable change in the appearance of the textile. The properties which may be assessed for appearance change include, but are not limited to: 1) seam puckering due to differential shrinkage of panels; 2) blistering, delamination or deterioration of coated, bonded, laminated and fused fabrics; 3) staining of fusibles; 4) fraying of seams; 5) deterioration of fasteners; or 6) performance of textile or non-textile trim (Note 1). 1.3 The symbol system described in this standard is not intended to be used on upholstered furniture, mattresses, carpets, articles predominantly leather and/or fur, yarns or hosiery (Note 2). 1.4 Symbols are specified for five restorative treatments: washing, bleaching, drying, ironing/pressing and dry cleaning. Symbols are defined in terms of standard test methods. 1.5 It should not be assumed that the absence of a particular care symbol on a label implies that the care procedure represented by that symbol may be safely used. For example, when no dry-cleaning symbol is shown on a care label bearing a washing symbol, dry cleaning may cause damage; conversely when no washing symbol is shown on a care label bearing a dry-cleaning symbol, washing may cause damage. (See Section 5.) Note 1: Recommended test methods for the assessment of appearance changes are listed in Appendix A. Note 2: Upholstered furniture, carpets, and articles predominantly leather and/or fur require special care procedures that are not addressed in this standard. Yarns and hosiery are excluded from the scope of this standard due to the lack of test methods for the determination of dimensional stability.
SDO:
CGSB
Language:
English
ICS Codes:
59.080.01; 61.020
Status:
Withdrawn
Publish date:
1991-12-30
Standard Number:
CAN/CGSB-86.1-M91