CAN3-C108.1.5-M85 (R2013)

Line Impedance Stabilization Network (LISN)
1. Scope 1.1 This Standard outlines the technical properties of and specifications for a line impedance stabilization network (LISN) used in the measurement of conducted electromagnetic emissions in the frequency range 0.01 to 30 MHz. 1.2 The LISN is applicable to the measurement of electromagnetic interference voltages originating from electrical apparatus and conducting into the public power network. The purpose of the LISN is to provide a defined impedance over the specified frequency range between each of the power terminals and ground of the equipment under test (EUT) and also to isolate the test circuit from unwanted radio frequency signals from the public power network. 1.3 For specific measurement procedures reference must be made to the appropriate technical standard applicable to the equipme nt under test. Described in Appendix A is a typical method of measurement that is intended to illustrate the general use of the LISN in the measurement of the conducted emissions.
SDO:
CSA
Language:
English
ICS Codes:
17.220.20
Status:
Withdrawn
Publish date:
1984-12-31
Standard Number:
CAN3-C108.1.5-M85 (R2013)