Stationary Engine Generator Assemblies

ULC Standards Logo
Standards Development Organisation:
ULC Standards
Contact Information:
ULC Standards Normes ULC
Working Program:
View the ULC work program
Designation Number:
ANSI/CAN/UL/ULC 2200
Standard Type:
National Standard of Canada - Domestic
Standard Sub-Type
Joint Canada-U.S. National Standard
Standard Development Activity:
Amendment Revision
ICS code(s):
29.160.40
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

Note: The project need for this NOI (originally published on November 2, 2021) was updated by the responsible SDO on December 21, 2021.

Scope of UL/ULC 2200: These requirements cover stationary engine generator assemblies that are intended for installation and use in ordinary locations in accordance with the following: a) The National Electrical Code, NFPA 70; b) The Canadian Electrical Code, Part I, CSA C22.1; c) The Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines, NFPA 37; d) Natural Gas and Propane Installation Code, CSA B149.1; e) The Code for Digester Gas, Landfill Gas, Biogas Generation and Utilization, ANSI/CSA B149.6; f) The Installation Code for Oil-Burning Equipment, CSA B139; g) The Standard for Health Care Facilities, NFPA 99; h) The Code for Canadian Health Care Facilities, CSA Z8000; i) The Standard for Emergency, Standby Power Systems, NFPA 110; and j) Emergency Electrical Power Supply for Building, CSA C282. Hazards addressed by this Standard include electrical (energy, shock, explosion, and fire), mechanical (enclosures and moving parts), fuel related (containment and flow control for liquid and gaseous fuels including purge / dilution functions), and prime mover related hazards. These requirements do not cover engine generator assemblies for use in hazardous (Classified) locations. These requirements do not cover engine generator assemblies for shipboard marine applications.

Project need:

Revisions to UL/ULC 2200 are proposed to address the following: 1. New Definition for Glossary 2. Correction to Spacings Table 25.1 3. Medium Voltage (MV) Walk-in Enclosure Door Mechanical Interlock 4. Generator Assemblies with Diesel Exhaust Systems (DEF) 5. Addition of Requirements for Accessory Equipment 6. Revision to the Test Potential for Medium Voltage Circuits in Table 69.1 7. Correction to Rain Test Spray Head Figure 103.2 8. Updates to Referenced Publications

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.