Standard for Hose Nozzle Valves for Flammable and Combustible Liquids

ULC Standards Logo
Standards Development Organisation:
ULC Standards
Contact Information:
ULC Standards Normes ULC
Working Program:
View the ULC work program
Designation Number:
ANSI/CAN/UL/ULC 2586
Standard Type:
National Standard of Canada - Domestic
Standard Sub-Type
Joint Canada-U.S. National Standard
Standard Development Activity:
New Standard
ICS code(s):
23.060.01
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

1.1 These requirements cover hose nozzle valves that are intended to be used for the control of flammable and combustible liquids. They are of the type used in motor fuel dispensing equipment. Hose nozzle valves covered by this standard are for use with flammable and combustible liquids which are handled at temperatures within the range of -29 °C (-20 °F) to 52 °C (125 °F) and an operating pressure of minimum 50 psi (350 kPa).
 
1.2 These requirements cover hose nozzle valves of the manually operated and automatic pressure operated type.
 
When they form a part of an assembly which provides for additional functions or service, the requirements are outside the scope of these requirements.
 
1.3 These requirements do not cover the following:

  1. Hose nozzle valves for handling liquids under cryogenic conditions;
     
  2. Hose nozzle valves for general refinery service, offshore and pipe line terminals, natural gas processing plants, gas distribution systems, petrochemical processing facilities, or the like;
     
  3. Hose nozzle valves operated wholly or partially by electricity or battery; or
     
  4. B Hose nozzle valve readers that are powered from internal batteries.  These are covered under UL1238A, Outline of Investigation for Battery Operated Hose Nozzle Valve Readers.

1.4 For hose nozzle valves intended to be used with gasoline/ethanol blends with nominal ethanol concentrations above 10%, refer to the Standard for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85), UL 2586A, for additional requirements.

 
1.5 For additional requirements for hose nozzle valves for biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 Percent (B20), refer to the Standard for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil, UL 2586B.
 
1.6 Products covered by this Standard are intended to be installed and used in accordance with the applicable Codes and Regulations as determined by the Authority Having Jurisdiction (AHJ), such as, but not limited to:
 
In the United States:
Code for Motor Fuel Dispensing Facilities and Repair Garages, NFPA 30A.
 
In Canada:
The National Fire Code of Canada

 

Project need:

The standard will be designated as a joint ANSI/SCC standard and is intended to support certification programs in Canada and the US. We are merging CAN/ULC-S620, Standard for Hose Nozzle Valves for Flammable and Combustible Liquids with ANSI/UL 2586, Standard for Safety for Hose Nozzle Valves which will result in a joint Canada/US standard. Manufacturers will benefit from reduced administrative burden when product only needs to be tested to a single standard. Regulators will benefit from reduced overlap in standards requirements.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.