Standard for Categories 1 and 2 Foam Liquid Concentrates

ULC Standards Logo
Standards Development Organisation:
ULC Standards
Contact Information:
ULC Standards Normes ULC
Working Program:
View the ULC work program
Designation Number:
ULC-S564
Standard Type:
Consensus SDO Standard
Standard Development Activity:
Amendment Revision
ICS code(s):
13.220.10
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

1. The Standards for foam liquid concentrates are divided into three categories.

Category 1 Primarily for use on general-purpose hydrocarbon fires

Category 2 Primarily for use on polar solvents, oxygenated fuels, and water-miscible fuels and all Category 1 applications

Category 3 Primarily for use on aircraft rescue fire fighting and all Category 1 applications

This Standard refers to Categories 1 and 2 foam liquid concentrates.

 

NOTE:  The requirements for Category 3 Aqueous Film-Forming Foam (AFFF) Liquid Concentrates are contained in the Standard CAN/ULC-S560 and the requirements for Category 3 Film-Forming Fluoroprotein (FFFP) Foam Liquid Concentrates are contained in the Standard CAN/ULC-S563.

2. These requirements cover foam producing equipment and liquid concentrates employed for the production and discharge of foam that has an expansion ratio of 20:1 or less and is used for fire extinguishment.  These requirements are based on the premise that foam equipment and specified types of foam liquid concentrates with which they are intended to be used are to be investigated for use with each other.

3. If foam equipment covered by these requirements incorporate sprinklers, the sprinklers shall comply with the requirements for Automatic Sprinklers for Fire-Protection Service, ULC/ORD-C199.

4. Requirements for the installation and use of foam equipment and liquid concentrates are included in the following Standards of the National Fire Protection Association:

A       Standard for Low Expansion Foam, NFPA 11;

B       Standard for the Installation of Deluge Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16; and

C       Standard for the Installation of Closed-Head Foam-Water Sprinkler Systems, NFPA 16A.

Project need:

The following proposals to ULC S564 are being made to align ULC S564 with NFPA 11 consistent with the Scope of ULC S564. 1. Deletion of reference to NFPA 16 and update of NFPA 11 title. 2. Addition of a definition for Synthetic Fluorine Free Foam (SFFF).  3. Addition of Combustion Ion Chromatography test. 4. Revision to Table 4 to allow higher application densities and addition of clarifying content. 5. Revision to Table 5 to allow higher application densities and addition of clarifying content.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.