Vacuum cleaners and dust extractors providing equipment protection level DC for the collection of combustible dusts – Particular requirements

Designation Number:
CSA C22.2 NO. 62784
Standard Type:
National Standard of Canada - Adoption of International Standard
Standard Development Activity:
New Standard
ICS code(s):
97.080
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

This   International   Standard   covers   electrical   mobile   motor-operated   vacuum   cleaners Equipment Protection Level (EPL) Dc.

 

This includes dust extractors, for wet suction or dry suction, intended for commercial indoor use with or without attachments, to collect combustible dust in an explosive dust atmosphere.

 

This document supplements and modifies the requirements of IEC 60079-0. Whenever a requirement of this standard is in conflict with a requirement of IEC 60079-0 the requirement of this standard will take precedence.

 

The following power systems are covered:

 

–             mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances.

 

This document does not cover specific hazards associated with extreme ambient temperatures (less than –20 °C or higher than 40 °C) unless otherwise marked by the manufacturer as given in IEC 60079-0. The temperatures shall not exceed the temperature range of –20 °C to +60 °C.

 

This document does not cover motorized cleaning heads for which additional requirements are under consideration.

 

This document does not apply to

 

back-pack vacuum cleaners

  • vacuum cleaners with a traction drive;
  • vacuum       cleaners        and      water-suction         cleaning       appliances        for     household       use (IEC 60335-2-2);
  • floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72);
  • spray extraction machines for commercial use (IEC 60335-2-68);
  • hand-held  mains-operated  electrical  garden  blowers,  vacuums  and  blower  vacuums (IEC 60335-2-100);
  • hand-held and transportable motor-operated electric tools (IEC 62841 series);
  • appliances for medical purposes (IEC 60601-1);
  • machines designed for use in corrosive environments;
  • machines designed for picking up flammable liquids;

machines designed for use in explosive environments due to the presence of explosive substances or pyrotechnical products, or unstable chemical substances

Project need:

To align Canadian requirements with those of international standards in the field of hazardous locations and to align with the Canadian Electrical Code, Part I.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.