Selection, use, and care of respirators

Designation Number:
CSA Z94.4:18
Standard Type:
National Standard of Canada - Domestic
Standard Development Activity:
Reaffirmation
ICS code(s):
13.340.30
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

Scope

1.1

This Standard sets out requirements for the selection, use, and care of respirators and for the administration of an effective respiratory protection program in the workplace.

1.2

This Standard is applicable to the selection, use, and care of respirators for non-emergency and emergency situations.

1.3

This Standard is not intended to address the selection of

a) respirators for aircraft oxygen systems;

b) supplied-air suits; or

c) respirators for protection against radiological contaminants.

This Standard applies to all other aspects of a respiratory protection program for these respirators.

1.4

This Standard is not intended to address

a) underwater breathing devices (see CSA Z275.2);

b) requirements for protection for first responders during CBRN (chemical, biological, radiological, and nuclear) events (see CAN/CGSB/CSA-Z1610); or

c) inhalators and resuscitators.

1.5

The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

1.6

In this Standard, shall is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; should is used to express a recommendation or that which is advised but not required; and may is used to express an option or that which is permissible within the limits of the Standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Project need:

Project Need
To review the Standard within the required 5 year period.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.