Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Spray Extraction Appliances, for Industrial and Commercial Use
Scope:
This clause of part 1 is applicable except as follows:
1.1 Addition:
This standard applies to portable electrical motor-operated spray extraction appliances and electrical attachments employing water-based cleaning agents for cleaning fabrics, upholstery, carpets, floor coverings or hard surfaces, intended for industrial and commercial use.
Commercial uses are for example for use in hotels, schools, hospitals, factories, shops and offices, for other than normal housekeeping purposes, and in the rental business.
Machines with or without electrical heating elements and with or without attachments are within the scope of this standard.
This standard covers appliances in which the pressure of the cleaning agent is positive and not more than 25 bars, or in which the product of the pressure (in bars) and the flow of cleaning agent (in litres per minute) does not exceed 1000, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85°C.
This standard also applies to machines handling hazardous dust, e.g. asbestos, or liquids for which additional requirements apply.
It is also applicable to appliances making use of other forms of energy for the motor; but it is necessary that their influence is taken into consideration.
Modification:
Replace the first two dashed paragraphs of note 3 by the following:
- appliances exclusively designed to handle hazardous solvents, such as flammable or explosive liquids; - appliances solely designed for household use; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (vapour or gas). /
Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.
Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.