Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers

1 Scope 
[Add the following]

This Standard covers the above noted products that are intended to be installed or used in accordance with 
CSA C22.1, the Canadian electrical Code, Part I.

This clause of Part 1 is replaced by the following.

This International Standard deals with the safety of electric ironers for household and similar purposes, their 
rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

Appliances not intended for normal household use but which nevertheless may be a source of danger to the 
public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within 
the scope of this standard.

NOTE 101 Examples of appliances within the scope of this standard are

- ironing presses for one-person operation;

- mangles;

- rotary ironers for one-person operation;

- trouser presses. 

As far as is practicable, this standard deals with the common hazards presented by appliances that are 
encountered by all persons in and around the home. However, in general, it does not take into account

- persons (including children) whose

* physical, sensory or mental capabilities; or

* lack of experience and knowledge 

prevents them from using the appliance safely without supervision or instruction;

- children playing with the appliance.

NOTE 102 Attention is drawn to the fact that

- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be 
necessary;

- in many countries additional requirements are specified by the national health authorities, the national 
authorities responsible for the protection of labour and similar authorities.

NOTE 103 This standard does not apply to

- rotary ironers for operation by more than one person. The roller length of such appliances normally exceeds 
1,6 m in length;

- appliances intended exclusively for industrial purposes;

- appliances intended to be used in locations where special conditions prevail, such as the presence of a 
corrosive or explosive atmosphere (dust, vapour or gas);

- electric irons (IEC 60335-2-3)