Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods

Designation Number:
CSA C22.2 NO. 60335-2-99
Standard Type:
National Standard of Canada - Adoption of International Standard
Standard Development Activity:
New Standard
ICS code(s):
97.040.20
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

Scope

This clause of Part 1 is replaced by the following.

This part of IEC 60335 deals with the safety of electrically operated commercial hoods intended for installation above commercial cooking appliances such as ranges, griddles, griddle grills and deep fat fryers, their rated voltage being not more than 250 V for single phase hoods connected between one phase and neutral, and 480 V for other hoods . Only single complete units and hoods supplied as separate parts which when assembled form a complete working hood, incorporating a fan, are within the scope of the standard.

The hood may be used above one or more appliance or types of appliances.

The following extraction systems are within the scope of this standard:

– back-draft ventilation systems;
– down-draft ventilation systems;
– fume extraction modules.

These appliances are not intended for household and similar purposes. They are used in areas not open to the public, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries and butcheries.

As far as is practicable, this standard deals with the common hazards presented by these types of appliances.

Attention is drawn to the fact that:

– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary; 
– in many countries additional requirements including ventilation requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities.

This standard does not apply to:

– domestic range hoods (IEC 60335-2-31);
– purpose-built hoods, although this standard can be used as a guide (a purpose-built hood is either constructed on-site or specially constructed in the factory and is not mass produced);
– appliances not incorporating a fan;
– appliances designed exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); 
– battery-operated appliances.

Project need:

Project Need
To align Canadian requirements with those of international standards in the household and similar electrical appliances subject area, especially for commercial electric hoods. This proposed New Standard is being developed at the request of Certification agencies. It will provide the industry with updated references and requirements based on current best practices.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.