Commercial Dishwashers

Logo
CSA Group
Standards Development Organisation:
Working Program:
Designation Number:
(ANSI Z83.21-2005)C22.2 NO. 168-2005 (R2011)
Standard Type:
Consensus SDO Standard
Standard Development Activity:
Reaffirmation
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

Scope

.1
This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers,utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems integral to the appliance, or by means not integral to the dishwasher that is provided at the installation site.

1.2
This Standard covers:

a. Electric dishwashers rated 600V or less, installed in accordance with the Canadian Electrical Code(CEC), Part 1, CSA C22.1, and the National Electrical Code (NEC), NFPA 70; and

b. The gas-handling, gas-burning and gas-control features of gas-fired dishwashers having inputs of 400,000 Btu/hr (420 MJ/hr) or less, limited to 0.5 psig (3.45 kPa) inlet pressure, installed in accordance with the National Fuel Gas Code, ANSI Z223.2/NFPA 54, or the Natural Gas and Propane Installation Code, CAN/CSA B149.1 for use with:

1. Natural gas;

2. Manufactured gas;

3. Mixed gas;

4. Propane gas;

5. Liquefied petroleum gases; or

6. LP gas-air mixtures.

1.3
These requirements cover dishwashers intended for use in commercial establishments, such as kitchens of restaurants and hospitals, where they are not intended to be accessible to the public.

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.