Textile Test Methods - Textiles - Fibres and Yarns - Determination of Commercial Mass of Consignments - Part 1: Mass Determination and Calculations

Designation Number:
CAN/CGSB-4.2-No.72.1-M91/ ISO-6741-1:1989 IDT
Standard Type:
National Standard of Canada - Domestic
Standard Development Activity:
Withdrawal
Status:
Proceeding to development
SDO Comment Period Start Date:
SDO Comment Period End Date:
Posted On:

Scope:

Scope

This National Standard of Canada has been extended and reaffirmed by the CGSB Committee on Textile Test

Methods and Terminology. It is identical in content and in layout with International Standard ISO 6741-1, Textiles

— Fibres and yarns —

Determination of commercial mass of consignments — Part 1: Mass determination and calculations, published 1989-07-01 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee to determine its suitability for Canadian use. It was agreed to use it in total, without editorial changes. Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever they appear.

Some terminology and conventions are not identical to those used in other test methods within CAN/CGSB-4.2

— Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker rather

than the point.

The following National Standards of Canada correspond to the referenced ISO standards:

CANADA                                                        ISO

CAN/CGSB-4.2 No. 2                                    ISO 139

CAN/CGSB-4.175 Part 2/ISO 6348              ISO 6348

CAN/CGSB-4.2 No. 72.2/ISO 6741-2           ISO 6741 Part 2

CAN/CGSB-4.2 No. 72.3/ISO 6741-3           ISO 6741 Part 3

The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its

use. Anyone using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its

use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed.

Project need:

Project Need
Withdrawal

Note: The information provided above was obtained by the Standards Council of Canada (SCC) and is provided as part of a centralized, transparent notification system for new standards development. The system allows SCC-accredited Standards Development Organizations (SDOs), and members of the public, to be informed of new work in Canadian standards development, and allows SCC-accredited SDOs to identify and resolve potential duplication of standards and effort.

Individual SDOs are responsible for the content and accuracy of the information presented here. The text is presented in the language in which it was provided to SCC.