Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification
ISO 17987-6:2016 specifies the LIN protocol conformance test. This test verifies the conformance of LIN communication controllers with respect to ISO 17987‑2 and ISO 17987‑3.
ISO 17987-6:2016 provides all necessary technical information to ensure that test results are identical even on different test systems, provided that the particular test suite and the test system are compliant to the content…
Water quality — Radium-226 — Part 4: Test method using alpha spectrometry
This document specifies methods to determine 226Ra in all types of waters by alpha spectrometry.
The methods are applicable to test samples of supply/drinking water, rainwater, surface and ground water, marine water, as well as cooling water, industrial water, domestic, and industrial wastewater after proper sampling and handling, and test sample preparation.
The detection limit depends on the…
Cryogenic vessels — Centrifugal pumps for cryogenic service
ISO 24490:2016 specifies the minimum requirements for the design, manufacture and testing of centrifugal pumps for cryogenic service.
ISO 24490:2016 does not apply to reciprocating pumps.
This International Standard also gives guidance on the design of installations (see Annex A).
It does not specify requirements for operation or maintenance.
NOTE For general requirements for materials used in…
Preparation of steel substrates before application of paints and related products — Specifications f...
This document specifies requirements for lava abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to…
Refrigerating systems and heat pumps — Qualification of tightness of components and joints
ISO 14903:2017 provides the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described in relevant parts of ISO 5149. The sealed and closed components, joints and parts concerned are, in particular, fittings, bursting discs, flanged or fitted assemblies. The tightness of…
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform chang...
ISO 4628-3:2016 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards.
The pictorial standards provided in this part of ISO 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust.
NOTE 1 The pictorial standards have been selected from the "…
Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method
This standard specifies a method for testing the corrosivity of disinfectants spray against metallic materials, including instruments, reagents, preparation and pretreatment of the test specimens, test conditions, test methods, calculation of corrosion rate, reports, etc.
This standard is applicable to the determination of corrosion of disinfectants spray to metal materials.
This standard does…
Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables — Spécifications et méthodes d...
ISO 11118:2015 spécifie les exigences minimales applicables aux matériaux, à la conception, aux contrôles, à la fabrication et à la qualité d'exécution ainsi qu'aux procédés de fabrication et aux essais chez le fabricant de bouteilles à gaz métalliques non rechargeables, soudées, brasées ou sans soudure, utilisées pour les gaz comprimés et liquéfiés, y compris les exigences pour leurs…
Gas welding equipment — Decomposition blockers for high-pressure acetylene
This International Standard establishes the general specifications, requirements and tests for decomposition blockers located on the high-pressure side in battery vehicles and gas containers as defined in EN 13807 or in acetylene bundles as defined in ISO 10961 or in filling systems.
