IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminatio...
This National Standard of Canada is equivalent to the Institute of Electrical and Electronics Engineers Standard IEEE 48-1990.
1.1 Scope
This standard covers all indoor and outdoor cable terminations used on alternating-current cables having laminated or extruded insulation rated 2.5 kV through 500 kV except separable insulated connectors, which are covered by IEEE Std 386-1985, Separable…
Commentary on CSA Standard CAN/CSA-S16.1-M89, Limit States Design of Steel
Structures
1. SCOPE AND APPLICATIOn
This Standard applies generally to steel structures, and structural steel
components in other structures. The analysis, design, detailing, fabrication,
and erection requirements contained in the Standard normally provide a
satisfactory level of structural integrity for most steel structures.
Clause 1.2 states that requirements for some specific types of…
This National Standard of Canada is equivalent to International Standard ISO 6683-1981.
This International Standard establishes the minimum performance requirements
for seat belts and the fastening elements of seat belts necessary to restrain
an operator or rider within a roll-over protective structure (ROPS) in the
event of a machine roll-over as defined in ISO 3471.
NOTE - Dynamic seat…
This standard applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for outdoor use.
1.1 This standard applies to the design, colour, materials, construction and
performance requirements of the National Flag of Canada intended for indoor
use.
Commentary to CSA Standard CAN/CSA-S472-92, Foundations
This Commentary applies to the design of foundations for fixed offshore
structures. The term "foundation" is defined as the seabed, any fill, and any
artificial elements (eg, piles or skirts) that penetrate or rest upon these
materials and that in whole or in part support production structures and
facilities. The Standard is divided into subsections that address
(a) site…
This National Standard of Canada is equivalent to International Standard ISo
704:1987.
This International Standard establishes principles and methods which are
designed to unify and standardize the elaboration of terminology standards at
the national and international levels.
These principles (and methods) are general in nature and can be adapted if
required to more specific terminology…
This National Standard of Canada is equivalent to International Standard ISo
1087:1990.
This International Standard establishes a basic vocabulary for terminology
science and its practical applications. It is applicable to terminological
activities at national and international levels.
Application of the Canada Standard System for the Sizing of Women's Wearing
Apparel
1.1 This standard presents a modification of the complete Canada Standard
sizing system described in CAN/CGSB-49.201. More specifically, the control
body dimensions trunk length and crotch height have been replaced by the size
indicator dimensions back-waist length and waist height, respectively, to make
the system conform more closely to present trade practice.
1.2 Sizes are defined in terms…
Textile Test Methods - Textiles - Tests for Colourfastness - Part J01:
Measurement of Colour and Co...
This National Standard of Canada is equivalent to International Standard ISO
105-J01:1989.
This part of ISO 105 specifies a method for measuring the colour difference
between two specimens of textile in any form. The existence of a master
reference is necessary when the test is carried out by comparing the master
reference with the test specimen. The method is applicable to coloured…