Wire and cable test methods (Tri-national standard, with NMX-J-556-ANCE- 2013 and UL 2556)
Scope
1.1 This standard describes the apparatus, test methods, and formulas to be used in carrying out the tests and calculations required by wire and cable standards.
1.2 Specific acceptance requirements are found in individual product standards.
1.3 Where a test method indicates a "specified" test parameter or condition, the parameter or condition is found in the individual product…
Safety of Household and Similar Electrical Appliances — Part 2-34:
Particular Requirements for Motor...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of sealed (hermetic and semi-hermetic type) motorcompressors,
their protection and control systems, if any, which are intended for use in equipment for
household and similar purposes and which conform with the standards applicable to such equipment. It
applies to motor-compressors…
Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in...
ISO 16911-1:2013 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular or rectangular ducts with measurement locations meeting the requirements of EN 15259. Minimum and maximum duct sizes are driven by practical considerations of the measurement devices described within ISO 16911-1:…
Standard for Suspended Ceiling Grid Low Voltage Systems and Equipment
1.1 These requirements cover suspended ceiling grid low voltage systems and equipment intended for
installation and use in accordance with the:
In Canada:
Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, CSA
C22.1,
In the United States:
National Electrical Code (NEC), ANSI/NFPA 70.
1.2 The suspended ceiling grid low voltage systems covered by this standard are…
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
IEC 60068-2-65:2013 provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. This second edition cancels and replaces the second edition, published in 1993, and constitutes a technical revision. This edition…
Household and similar electrical appliances — Safety — Part 2-13:Particular requirements for deep fa...
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric deep fat fryers having a
recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other
appliances in which oil is used for cooking, and intended for household use and similar use,
their rated voltage being not more than 250 V.
Appliances intended for…
Household and similar electrical appliances — Safety —
Part 2-26: Particular requirements for clocks
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric clocks having a rated voltage not
more than 250 V.
NOTE 101 Examples of appliances that are within the scope of this standard are
– alarm clocks;
– spring-driven clocks with an electrically operated winding mechanism;
– clocks incorporating driving means other than motors.
As…
Plugs, receptacles, and couplers for electric vehicles (Tri-national standard, with UL 2251 and NMX...
Scope
1.1 These requirements cover plugs, receptacles, vehicle inlets, vehicle connectors, and breakaway couplings, rated up to 800 amperes and up to 600 volts ac or dc, intended for conductive connection systems, for use with electric vehicles. These devices are for use in either indoor or outdoor nonhazardous locations in accordance with Annex A, Ref. No. 1.
1.2 This Standard does not directly…
Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2013)
Scope
1.1 This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in accordance with the National Electrical Code (NEC), NFPA 70, the Canadian…
Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
Scope
1.1 This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in accordance with the National Electrical Code (NEC), NFPA 70, the Canadian…
