Search

This National Standard of Canada is equivalent to International Standard ISO 10012:2003 (first edition, 2003-04-15). 1 Scope This International Standard specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies the…

This National Standard of Canada is based on International Standard ISO 15189:2003 (first edition, 2003-02-15). 1 Scope This International Standard specifies requirements for quality and competence particular to medical laboratories.

1 Domaine d'application 1.1 Cette norme s'adresse aux fabricants et aux acheteurs de machines vendues au Canada ou exportées à l'étranger. Elle s'adresse également aux organismes de régulation, aux acousticiens et à tous les intéressés. 1.2 Cette norme a pour but de fournir: a) un guide quant aux étapes à suivre pour produire et vérifier une déclaration des valeurs d'…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-37:2001 (first edition, 2001-07). 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies particular safety requirements for ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 2.1.145. This standard does not cover…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-43:2000 (first edition, 2000-06). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for prolonged RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES. Its scope…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-44:2001 (second edition, 2001-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT for COMPUTED TOMOGRAPHY (CT SCANNERS). It includes safety requirements for the X-RAY GENERATOR, and those where HIGH…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-38:1996 (first edition, 1996-10). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard specifies requirements for safety of ELECTRICALLY OPERATED HOSPITAL BEDS, hereinafter referred to as BED, as defined in 2.2.101. 1.2 Object…

This National Standard of Canada is based on International Standard ISO 15078:1998 (first edition, 1998-07-01). 1 Scope This International Standard specifies the operational pattern for log loader controls. Two alternative two-lever systems are specified. This International Standard applies to two-lever control systems for grapple-type log loaders used in mobile and self-propelled…

This National Standard of Canada is based on International Standard CEI/IEC 60871-1:1997 (second edition, 1997-10). 1 Scope and object This part of IEC 60871 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz. This part of IEC…

This National Standard of Canada is based on International Standard ISO 10079-2:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for manually powered medical suction equipment intended for oro-pharyngeal suction. It covers equipment operated by foot or by hand or both (see Figure 1). Non-electrical suction equipment which may be…