Search

CISPR 16-1-5:2014 specifies the requirements for calibration sites in the frequency range 5 MHz to 18 GHz used to perform antenna calibrations according to CISPR 16-1-6. It also specifies the requirements for reference test sites that are used for the validation of compliance test sites in the frequency range 30 MHz to 1 000 MHz according to CISPR 16-1-4. It has the status of a basic EMC standard…

1 Scope 1.1 Mitigation techniques and other actions This Standard covers the following mitigation techniques to maintain permafrost or remediate permafrost degradation around existing buildings or structures: a) site techniques that consist of i) shading; ii) drainage and grading; and iii) ground cover and snow management; b) foundation techniques that consist of i) ventilation; ii)…

1 Domaine d'application 1.1 Techniques d'atténuation et autres mesures Cette norme traite des techniques d'atténuation suivantes visant à maintenir le pergélisol ou à remédier à sa dégradation autour des structures existantes : a) techniques agissant sur le site : i) protection solaire ; ii) drainage et nivellement ; et iii) gestion du recouvrement de sol et de la neige ; b…

1 Scope 1.1 This Standard deals with over-the-shoe toe protectors for temporary use and includes requirements for one grade of toe impact resistance. Note: This type of protector should not be confused with fully-integrated safety footwear (as specified in CSA Z195). 1.2 This Standard also provides requirements for slip-resisting over-the-shoe toe protectors. 1.3 For the purpose of this…

1 SCOPE 1.1 This standard provides minimum acceptable performance parameters for video surveillance systems. The system stakeholder determines the video surveillance system operational requirements. Refer to Section 8, System Operational Performance Requirements. 1.2 The purpose of this Standard is to provide guidance to ensure that security video system functions and performance are…

1.1 This Standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls and boards. Where facings are used, they shall be either permeable or vapour retarding membranes, as defined in TABLE 1 for Types 2 and 3, respectively. This standard does not permit the application of kraft paper facings on batts and rolls. It also applies to loose fill…

1 Domaine d’application 1.1 Installations Ce guide et le DLG s’appliquent surtout aux centrales nucléaires CANDU au Canada. Les radionucléides et les voies de pénétration dans l’environnement dont elles traitent permettent toutefois de l’appliquer aux rejets de nombreuses autres installations nucléaires, notamment de réacteurs de recherche, d’installations de retraitement des radio-isotopes…

1 Scope This part of ISO 19905 provides a commentary to some clauses of ISO 19905-1 including background information, supporting documentation, and additional or alternative calculation methods as applicable and also provides a detailed sample 'go-by' calculation. ISO 19905-1 specifies requirements and guidance for the site-specific assessment of independent leg jack-up units for use in…

1 SCOPE 1.1 This Standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls and boards. Where facings are used, they shall be either permeable or vapour retarding membranes, as defined in Table 1 for Types 2 and 3, respectively. This standard does not permit the application of kraft paper facings on batts and rolls. It also applies to loose…

ISO 11268-3:2014 décrit des techniques utilisées pour étudier les effets de substances sur les vers de terre sur le terrain et constitue une base pour la détermination des effets des produits chimiques appliqués ou incorporés au sol, y compris des injections dans le sol ou l'enfouissement de granulés par semoirs.