Search

This document specifies general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses. It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope of ISO 5667‑23. This document is…

Le présent document spécifie les exigences générales relatives à l'échantillonnage, la conservation, la manipulation, le transport et le stockage de tous les échantillons d'eau, y compris ceux destinés à des analyses biologiques. Elle ne s'applique pas aux échantillons d'eau destinés à des analyses microbiologiques telles que spécifiées dans l'ISO 19458, des essais…

IEC 62153-4-7:2015+A1:2018 describes a triaxial method, suitable to determine the surface transfer impedance and/or screening attenuation and coupling attenuation of mated screened connectors (including the connection between cable and connector) and cable assemblies. This method could also be extended to determine the transfer impedance, coupling or screening attenuation of balanced or multipin…

Scope of the Certification The scope of the company's certification is defined depending on its activities. Following the initial audit, the scope is confirmed by the auditor and listed on the certificate. The activities that may be included in the scope are: timber harvesting, forest road construction, forest camp management and non-commercial silvicultural work (including the type of…

This document describes procedures to characterize quadrupole mass spectrometers (QMSs) with an ion source of electron impact ionization and which are designed for the measurement of atomic mass-to-charge ratios m/z < 300. This document is not applicable to QMSs with other ion sources, such as chemical ionization, photo-ionization or field ionization sources and for the measurements of higher…

1 SCOPE 1.1 This standard outlines the requirements for a site quality assurance program (SQAP) for the on-site installation of spray applied polyurethane foam (SPF). As the installation of the material is dependent on the installer, a site quality assurance program is required to provide assurance of compliance to material and installation standards to the property owner, authority having…

ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability. ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following: a) location and site selection; b) building…

ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability. ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following: a) location and site selection; b) building…

Le présent document spécifie un format de données pour consigner le résultat des mesurages des émissions des gaz d'échappement des moteurs alternatifs à combustion interne utilisés dans les installations mobiles, transportables et fixes, à l'exclusion des moteurs de véhicules conçus à l'origine pour des applications routières. Il contient les informations de base du moteur soumis à…

ISO 8178-6:2018 specifies a data format for reporting the measurement results of exhaust emissions from RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. It includes basic information of the engine being tested. Equivalent data formats including those that are electronically generated can be used as long as the required…