Search

1.1 This is a practice for using a radiochromic optical waveguide dosimetry system to measure absorbed dose in materials irradiated by photons and high energy electrons in terms of absorbed dose to water. The radiochromic optical waveguide dosimetry system is generally used as a routine dosimetry system.1.2 The optical waveguide dosimeter is classified as a Type II dosimeter on the basis of the…

1.1 Organization and content This standard sets out the requirements for the design, manufacture, testing and inspection of non-refillable containers with a capacity of not more than 1 L and their selection and use for the handling, offering for transport and transport of UN1950, aerosols and UN2037, gas cartridges, in Canada. This standard consists of six main sets of requirements. Sections…

This document specifies an oven-drying method for the determination of the dry matter content in paper, board, pulp and cellulosic nanomaterials in solid form, which all can be produced from virgin and /or recycled materials. It is also applicable to the determination of the dry matter content of paper and board for recycling. The procedure is applicable to paper, board, and pulp and cellulosic…

This document specifies the general requirements for and gives guidance on quality assessments of nucleic acid samples. It specifies general guidelines for library preparations and library quality assessments prior to sequencing and data generation.

This document specifies an oven-drying method for the determination of the dry matter content in suspensions of cellulosic nanomaterials. The procedure is applicable to cellulosic nanomaterial suspensions which do not contain any appreciable quantities of materials other than water that are volatile at the temperature of 105 °C ± 2 °C. It is used, for example, in the case of cellulosic…

1 Scope This document specifies application platform energy effectiveness (APEE) as a Key Performance Indicator (KPI) which quantifies the energy effectiveness of an application platform for an IT service in data centres. This KPI evaluates the energy consumption of an application platform prior to deployment. The purpose of this KPI is to measure the energy effectiveness of a set of target IT…

1.1 Organization and content This standard sets out requirements for designing, manufacturing and marking of Intermediate Bulk Containers (IBCs) and for selecting and using means of containment for the transportation of dangerous goods of Classes 3, 4, 5, 6.1, 8 and 9. This standard consists of two parts and five annexes. Part I contains the requirements for the design, manufacture and…

1.1 This Standard specifies the requirements for factory made rigid polystyrene insulation in the form of boards with or without facings or coatings made by moulding of pre-expanded beads (EPS) or extrusion of polystyrene (XPS). This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite board, gypsum board, or oriented…

This National Standard of Canada applies to glazing materials that have been subjected to the test methods described herein. Such test methods are intended to demonstrate minimum performance characteristics designed to reduce the likelihood of cutting and piercing injuries resulting when glazing materials used in areas of human impact (see Annex A) in building and architectural applications…

1.1 Types This standard applies to two types of middle distillate fuel, Type 11 and Type 15, normally used in naval operations whose product parameters are influenced by international military standardization agreement NATO STANAG 1385, Guide Specification for Naval Distillate Fuels (F-75 and F-76). Type 11 and Type 15 correspond to NATO codes F-76 and F-75 respectively, and are suitable for…