1.1 This standard applies to a durable alkyd-base gloss enamel suitable for
use on primed metal and wood surfaces.
1.2 For more detailed information on intended uses and method of application,
see par. 8.2 and 8.3.
This standard applies to TC-35 non-reusable, molded polyethylene drums with
removable heads to be used to transport dangerous goods. It states their
required capacity, material, construction, testing and marking.
1. Scope
1.1
This Standard applies to polyethylene pipe, tubing, and fittings for use in gas
mains and services, including gathering, transmission, and distribution
applications, that carry fuel gases containing not more than 1% aromatic
hydrocarbons.
1.2
This Standard also applies to all types of fittings and connections used in a
plastic gas pipe system including plastic-to-metal…
Standard Method of Fire Test of Exterior Wall Assemblies
1.1 This test method enables an assessment of the fire spread characteristics
of non-loadbearing exterior wall assemblies.
1.2 The test determines the comparative burning characteristics of exterior
wall assemblies by evaluating the following:
A Fire spread over the exterior surface;
B Heat flow from the fire plume to the exterior surface; and
C Fire spread within the test specimen.
1.3…
Standard Method of Test for Determination of Degrees of Combustibility of
Building Materials Using ...
1.1 This test method determines the degree of combustibility of building
materials by measuring the heat release rate from specimens exposed to
radiant heat using the test apparatus, specimen configurations and procedures
described.
1.2 This test method determines the amount of heat that may be contributed to
a fire involving products made from the same material as that of the test…
Test Method for Measuring Energy Consumption and Drum Volume of Electrically
Heated Household Tumble...
1.1
This Standard specifies the methods to be used for measuring the energy
consumption and drum volume, and for testing the performance characteristics,
of automatic household electric tumble-type clothes dryers.
1.2
This Standard describes methods for determining energy consumption with
associated energy factors and specifies maximum energy consumption limits.
1.3
This Standard applies to…
1.1
This Standard provides procedures for evaluating polymeric materials intended
for application in electrical equipment covered by the Canadian Electrical
Code, Part I, with respect to the following properties:
(a) flammability;
(b) mechanical;
(c) thermal;
(d) resistance to weathering; and
(e) electrical.
1.2
The test procedures listed in this Standard are provided for…
1.1 General
Except as provided for in Clause 1.1.2, this Standard applies to the design,
construction, installation, operation, and inspection of every refrigerating
system, as provided for by the Act and defined in this Code.
1.1.2
This Standard does not apply to the use of water or air as a refrigerant, nor
to bulk-storage gas tanks that are not permanently connected to a…
Performance Standard for Roadway Lighting Luminaires
1.1
This Standard provides energy and lighting performance requirements for
Cobra-head type luminaires using 50-400 W high-pressure sodium (HPS) lamps and
small and medium prismatic glass, polycarbonate and acrylic refractors.
1.2
This Standard applies to luminaires used along streets, roadways, and highways
in standard one-sided, staggered, and opposite layout arrangements.
1.3
This…
1.1
This Standard applies to medical gas piping systems for conducting nonflammable
medical gases used for patient care in health care facilities. Included in
this Standard are requirements pertaining to small systems such as those
serving dental suites, as well as systems providing nonflammable medical gases
to laboratories.
Notes:
(1) The manufacture, control, and distribution of…
